Rocks BarBQue Bar

Bar

Adapters for 5 cfm and 10 cfm blowers

Flat Adaptor

This stainless steel adapter works with The Big Green Eggs, Primo Grills, and Grill Domes. It  attach's in seconds with no tools. Just open your draft door, drop the adaptor into the bottom lip, slide the Blower to the left under the left lip. Close the draft door to hold the other side in place. This adaptor comes in several sizes. Specify your cooker type when ordering

$15.00

WSM / Weber Adaptor

WSM / Kettle Adaptor

This stainless steel adapter works with The Weber Smoky Mountain cooker(WSM), most Weber Kettles and many other Smokers. The adaptor does not require any drilling or tools to install. You can install and remove it from the outside of your Smoker in seconds.The Weber one touch grills require  additional air dams. Specify your cooker type when ordering.

$25.00

1 3/8" Round Port Adapter

This stainless steel adapter works with cookers that are fitted with a 1 3/8" round draft port. This fits Kamados and Komodos that have had the factory installed ports. It also fits many other cookers that have a 1 3/8" draft adapter. The high temperature silicone gasket prevents air leaks. Specify your cooker type when ordering.

$35.00

1 1/2 NPT Ball Valve Adapter

This adapter combined with 1 3/8" Round Port Adapter adapter will fit cookers that have a 1 1/2" ball valve. Screw the steel fitting into the ball valve. The blower slides in and is held in place by a spring for easy install/remove. . Specify your cooker type when ordering.

$20.00

Adapters for 25 cfm blowers

2" Flange Adapter

This Stainless Steel Flange Adapter is for the 25 CFM blower and can be screwed or welded onto most cookers. Install it so that the air will be directed towards the bottom of the fire grate. Specify your cooker type when ordering.

$30.00

2" Slider Adapter

This Stainless Steel Slider Adapter is for the 25 CFM blower. This adapter can be cut to fit most cookers with a sliding type draft door. Install it so that the air will be directed towards the bottom of the fire grate. Specify your cooker type when ordering.

$25.00

 

2" Weld On Adapter

This Steel Weld On Adapter is for the 25 CFM blower. This adapter can be welded onto most cookers made of steel. Drill a 1 3/4" hole and weld the adapter over the hole. locate the hole so the air will be directed towards the bottom of the fire grate. Specify your cooker type when ordering.

$15.00

2" Wheel Adapter

This Steel Wheel Adapter is for the 25 CFM blower. This adapter replaces the "wheel" type air inlet. For cookers with round air inlet wheels up to 8 inches. Just remove the existing air inlet wheel. Line up the air inlet on the adapter to match the air inlet on the cooker. Bolt the adapter on with the supplied hardware. Specify your cooker type when ordering.

$100.00

2" Silicone Hose

The 2" high temperature hose is required to couple the blower to the blower adapter. This hose comes with a 25cfm blower. Only order this if you want to carry a spare.

$20.00

Rock's Barbque L.L.C. All rights reserved